Industries

Electrical substations

Autonomous surveillance rounds and thermal inspection across the high-voltage yard, day and night.

30 days of autonomous operation at an electrical substation.

95.6%RPI

Robot Performance Indicator

Combines waypoints reached (50%), paths sent successfully (25%) and robot uptime (25%) over the 30 days.

Active patrol12.9 hper day on average.
Distance468 kmcovered autonomously.
Waypoints14,850reached on scheduled rounds.

The operation

  • 12 rounds a day, one every two hours
  • Between 1 h 14 min and 1 h 26 min per round
  • 54 inspection points across the site
  • 15 h 52 min of active patrol on a real day of operation

Surveillance and inspection in electrical substations.

An operating electrical substation, with outdoor high-voltage equipment, a wide perimeter and areas that staff enter as little as possible.

Watchbot covers the yard on scheduled rounds, day and night, combining intrusion detection with visual and thermal inspection of equipment on the same round. Each alert reaches AUROS with an image, a time and a location, and the control room reviews it before acting.

Electrical substations

The challenges of the operation.

  1. A wide, exposed perimeter

    Detects people in real time along the entire route, including overnight.

  2. Theft and vandalism at night

    A round every two hours throughout the night, with a visible presence and two-way audio from AUROS.

  3. Doors, fences and access points

    At each point it compares the image with a reference and flags open or forced doors, damaged fencing or objects out of place.

  4. Equipment overheating

    Thermal scanning of equipment and cooling fans against configurable temperature thresholds.

  5. Tank levels

    The thermal camera reads tank fill levels and flags any anomaly.

  6. Traceability for every round

    Every round and every alert is logged in AUROS for later review.

AI visual analytics

What Watchbot 2 would detect in electrical substations.

Intrusion

Intrusion

Detects people in restricted areas and sends the alert to AUROS.

Hot spots

Hot spots

The thermal camera measures equipment temperature and flags readings above the configured threshold.

PPE

PPE

Verifies helmets, goggles, high-visibility vests and gloves in areas where they are mandatory.

Doors

Doors

Verifies whether doors and access points are open or closed at each pass.

Thermal inspection in AUROS

Thermal inspection in AUROS

Thermal images are reviewed in AUROS alongside the site map.

Some images are illustrations of typical use cases and do not depict customer sites.

Tell us about your site.

We will assess how Watchbot 2 and AUROS fit your rounds and your risks.

Get a quote